Skate and Annoy: Daily

Venice Skatepark Construction

Construction started on new Venice skatepark

Curt Stevenson tipped me off that construction on the new 16,000 square foot Venice skatepark has broken ground. It’s a Wormhoudt design, but I don’t know who is building it. according to Yo Venice, the construction is supposed to take an inhumane TEN MONTHS! Really? That seems absurd, but then again, those California construction companies seem to work at a glacial pace. We’re still waiting for Ed Benedict to open here in Portland, and coincidentally, California Skateparks is the contractor on that long overdue opening. We never seem to have that problem when the jobs go to local contractors, I’m just saying… A web site called Venice Skatepark would seem to be the place to go for info, but so far it looks like the site is only aggregating feeds from elsewhere. A skateshop called, wait for it… Venice Skates has more of an inside line, including shots of Christian Hosoi, Pat Ngoho and Jesse Martinez taking a break from a session to revise some of the bowl plans. Considering the long and colorful history of street skating at Venice Beach, I’m surprised there is as much tranny in the design. It’s about half and half. I guess a street plaza would pretty much be replicating what was already there and legal to skate for the most part. Still, it’s an interesting choice.

[Source: Poweredge Magazine]

9 comments.  

Leave a Comment

9 comments

  • The park costs 2.4 million dollars. Doesn’t 150 dollars a square foot seem outrageous? Is this the cost of construction in California.

  • Rad! I can’t wait to go there in full pads and puff out my chest while talking about how we gotta “kill all da kooks,” while listening to some horrible hybrid of rap and metal set to the worst slap-bass ever recorded. VENICE POR VIDA AND SO FORTH!

  • Is there an area for break dancing?

  • breakin is a memory. anyway, wont there be too much sand in there?

  • Infectious Grooves

    Yo, Mike. You talk like there’s some kinda problem with the time tested metal-rap hybrid we got comin’ outta Venice. Think you is the one wit da problem. Betta cancel any travel plans you got fa comin’ our way, man. Cuz if you do, betta look out fa the bad dude with the tight fittin’ hockey jersey and stocking cap (me). Omma bitch slap you like I slap my bass. Gaboing gaboing boing! Right to the curb.

  • arrg wormhoudt. I just did a trip back down to norcal. His parks are getting better. sebastapol is fun. I think roosevelt in san jose is a wormhoudt park. Still they are not dreamland. I am not sure if the new better wormhoudt parks make up for all the shitty ones!? whatever though anything new is fun to skate. venice should be fun. The design looks good.

  • I’m confused…
    ..I thought Venice WAS a skatepark…
    😉

  • Where’s the gondola transfer!

  • is the park done???????????

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Zahid: Very informative article. Aluminium die casting is an excellent choice for producing lightweight and durable components, especially for electronics and industrial applications. Precision aluminium die...
  • Diogo Aires Carvalho Silva: Fofão is a children’s character from the Brazilian TV show Balão Mágico. He became so popular that he eventually got his own TV show. He was created and played by Brazilian actor and comedian Ori...
  • Kilwag: Cool thanks. I'll look him up and add him....
  • Tom: The rider in the advert is Davie Phillips (sp?) one time co-owner of Clan Skates (likely including when this advert was made). Skated for Zorlac I think....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Ashley del Cueto: How can I get a copy of this Ad?...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • rriddle3: In the early '60s in the area now occupied by the IH20 and IH35W interchange, was a huge pile of sawdust that contained seconds from Nash Skateboards. A friend and I would dig through it and take the ...
  • Brad: Looks like a piece of crap, intended to take money from suckers. Oh wait. Yeah, save your money and buy some silver bullion instead. ))...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Lana: We just found one of these in overgrown brush! It still squeaks! I have no idea how old it is! 😆...
  • Lee Marlar Marlar (Janis): Where can I still buy one? I’m 76, this thing is GREAT for us older folks to practice Balance!! MUCH BETTER THAN WHAT THEY USE FOR AT REHAB CENTERS! I can use it in my house! Please, Please bri...
  • Dave: You can see what the wrench part of the Elephant tool was actually made for; I never could figure it out from just looking at 80's trucks lol...
  • Norm: Makes sense, you can only keep making novelty eggs bigger to a point until they're just skimboards. Had to design something to jump the shark with I guess. Looks fun enough in that ride it once for ...
  • Cheyne Cottrell: Island Water Sports is actually based in Deerfield beach Fl, located on the barrier island! We're still around. In the 80's we went huge and open 30 stores, all over the US with a couple huge events ...
  • Juan Carlos: Yo tengo la misma, (l have the identic skate...
  • Dennis Allgeie: I have this stick on an original Oaks East skateboard that was bought from Dorsey Truitt at the Atlantic Skates Shop in OCMD! A totally prized procession ....
  • Maria Farr: Hi, if anyone out there has one of these items, we are desperately in need of one for our autistic grandson. He had one which got broken, and all he wants is a replacement. I’d gladly pay somebody...
  • Kilwag: I uploaded better scans of this ad. I don't have any Fantasy Skates stickers in the sticker gallery, if you ever get around to scanning them send them to me so I can add them,...
  • Kilwag: That's great! Upload that VHS footy and post a link!...
  • Raymon D White: Man this brings back memories. It was strictly Vans, and Nike high tops before Vision came out with their shoes. I gave them a shot as my first deck was a Gator, then a Gonzalez. Loved Vision, and ...
  • Whane: Jason is still alive and well (he's not THAT old haha). A few years back his mom passed and he managed the sale of her property but he himself lives further North now. We found some super old and grai...
  • PiNG!: LoNG TiME SNA FaN, THaNKz So MuCH, MuCH RESPeCT !!!...
  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...