Skate and Annoy: Galleries

Continental Skateboards: High Performance

We’re not sure what’s up with the “curved skid plate” but we suspect it has to do with reducing the flex of the flimsy plastic kicktail.

Detail:

Continental

The Revolutionary Wide-Tracker Truck

Offers the ultimate in traction-grip and performance.

  • Precision engineered
  • Super-wide 6″ axle guaranteed not to break
  • 5/16″ diameter steel alloy axle
  • All-steel alloy truck and hanger plate
  • Interchangeable axle housing
  • Maximum wheel track width 9″
  • Long-wearing king pin spacers and pivot

All Continental trucks and wheels come standard with sealed U.S. precision bearings. No more bearing loss or adjusting necessary.

Continental Wide-Tracker Wheel

  • Super-grip urethane
  • 2′ x 2,” wide
  • Sealed U.S. precision bearings

Continental Full-Race Bearings

  • Sealed U.S. made precision bearing
  • Dust and dirt resistant
  • Better weight distribution
  • Fully guaranteed bearings

Continental Super-Wide Tracker Wheel

  • Ultra-sticky urethane
  • 2,” x 3″ wide to wheel
  • Sealed U.S. precision

Continental’s New Surfer Model

  • 24″ extruded fibergalss
  • 6″ width
  • Sealed U.S. precision bearings standard
  • Sold exclusively by Jack
  • Chassis only or completed board available

Manufacturers of high-performance skateboards since 1963.

Continental offers the best, most reasonable prices for quality merchandise and workmanship. Available at finer surf shops. department and sporting goods stores throughout the world.

Dealers only write for free catalogue and wholesale pricing information.

All of the above accessories are shrink-packaged for easy point-of-purchase display and are shipped 24 units per case. Completed skateboards are shipped 6 or 12 per case.

Jack cruising the Jaws Kick-tail model.

Continental Skateboards 1939 East Pomona Santa Ana, CA 92705 Phone (714) 547-7551

Dealer Inquiries Welcome

Look to Continental for new innovations in skateboard equipment.

Skateboarder V2 N4 April 1976

See more ads from this issue.
See more ads from this magazine.

2 comments.  

Leave a Comment

2 comments

  • Lyndon Cook

    That’s Jackson Hokanson picture riding the orange skateboard– son of Jack Hokanson (the original owner of “Jack’s Surfboards” in HB). Gemco carried these too, as I recall, I still have a couple of boards that Jack gave me in the early 70’s. Good memories.

  • Hey!
    Amazing ilustrations, thanks so much
    I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3″ inch Continental.
    What model was?

    For You time and commens thanks so much
    Oscar

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Kilwag: Cool thanks. I'll look him up and add him....
  • Tom: The rider in the advert is Davie Phillips (sp?) one time co-owner of Clan Skates (likely including when this advert was made). Skated for Zorlac I think....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Ashley del Cueto: How can I get a copy of this Ad?...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • rriddle3: In the early '60s in the area now occupied by the IH20 and IH35W interchange, was a huge pile of sawdust that contained seconds from Nash Skateboards. A friend and I would dig through it and take the ...
  • Brad: Looks like a piece of crap, intended to take money from suckers. Oh wait. Yeah, save your money and buy some silver bullion instead. ))...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Lana: We just found one of these in overgrown brush! It still squeaks! I have no idea how old it is! 😆...
  • Lee Marlar Marlar (Janis): Where can I still buy one? I’m 76, this thing is GREAT for us older folks to practice Balance!! MUCH BETTER THAN WHAT THEY USE FOR AT REHAB CENTERS! I can use it in my house! Please, Please bri...
  • Dave: You can see what the wrench part of the Elephant tool was actually made for; I never could figure it out from just looking at 80's trucks lol...
  • Norm: Makes sense, you can only keep making novelty eggs bigger to a point until they're just skimboards. Had to design something to jump the shark with I guess. Looks fun enough in that ride it once for ...
  • Cheyne Cottrell: Island Water Sports is actually based in Deerfield beach Fl, located on the barrier island! We're still around. In the 80's we went huge and open 30 stores, all over the US with a couple huge events ...
  • Juan Carlos: Yo tengo la misma, (l have the identic skate...
  • Dennis Allgeie: I have this stick on an original Oaks East skateboard that was bought from Dorsey Truitt at the Atlantic Skates Shop in OCMD! A totally prized procession ....
  • Maria Farr: Hi, if anyone out there has one of these items, we are desperately in need of one for our autistic grandson. He had one which got broken, and all he wants is a replacement. I’d gladly pay somebody...
  • Kilwag: I uploaded better scans of this ad. I don't have any Fantasy Skates stickers in the sticker gallery, if you ever get around to scanning them send them to me so I can add them,...
  • Kilwag: That's great! Upload that VHS footy and post a link!...
  • Raymon D White: Man this brings back memories. It was strictly Vans, and Nike high tops before Vision came out with their shoes. I gave them a shot as my first deck was a Gator, then a Gonzalez. Loved Vision, and ...
  • Whane: Jason is still alive and well (he's not THAT old haha). A few years back his mom passed and he managed the sale of her property but he himself lives further North now. We found some super old and grai...
  • PiNG!: LoNG TiME SNA FaN, THaNKz So MuCH, MuCH RESPeCT !!!...
  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....