Skate and Annoy: Galleries

Continental Skateboards: High Performance

We’re not sure what’s up with the “curved skid plate” but we suspect it has to do with reducing the flex of the flimsy plastic kicktail.

Detail:

Continental

The Revolutionary Wide-Tracker Truck

Offers the ultimate in traction-grip and performance.

  • Precision engineered
  • Super-wide 6″ axle guaranteed not to break
  • 5/16″ diameter steel alloy axle
  • All-steel alloy truck and hanger plate
  • Interchangeable axle housing
  • Maximum wheel track width 9″
  • Long-wearing king pin spacers and pivot

All Continental trucks and wheels come standard with sealed U.S. precision bearings. No more bearing loss or adjusting necessary.

Continental Wide-Tracker Wheel

  • Super-grip urethane
  • 2′ x 2,” wide
  • Sealed U.S. precision bearings

Continental Full-Race Bearings

  • Sealed U.S. made precision bearing
  • Dust and dirt resistant
  • Better weight distribution
  • Fully guaranteed bearings

Continental Super-Wide Tracker Wheel

  • Ultra-sticky urethane
  • 2,” x 3″ wide to wheel
  • Sealed U.S. precision

Continental’s New Surfer Model

  • 24″ extruded fibergalss
  • 6″ width
  • Sealed U.S. precision bearings standard
  • Sold exclusively by Jack
  • Chassis only or completed board available

Manufacturers of high-performance skateboards since 1963.

Continental offers the best, most reasonable prices for quality merchandise and workmanship. Available at finer surf shops. department and sporting goods stores throughout the world.

Dealers only write for free catalogue and wholesale pricing information.

All of the above accessories are shrink-packaged for easy point-of-purchase display and are shipped 24 units per case. Completed skateboards are shipped 6 or 12 per case.

Jack cruising the Jaws Kick-tail model.

Continental Skateboards 1939 East Pomona Santa Ana, CA 92705 Phone (714) 547-7551

Dealer Inquiries Welcome

Look to Continental for new innovations in skateboard equipment.

2 comments.  

Leave a Comment

2 comments

  • Hey!
    Amazing ilustrations, thanks so much
    I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3″ inch Continental.
    What model was?

    For You time and commens thanks so much
    Oscar

  • Lyndon Cook

    That’s Jackson Hokanson picture riding the orange skateboard– son of Jack Hokanson (the original owner of “Jack’s Surfboards” in HB). Gemco carried these too, as I recall, I still have a couple of boards that Jack gave me in the early 70’s. Good memories.

Leave a Reply to Oscar (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Athena Catalog Mega Drop – Skate and Annoy: […] This profile looks familiar too. Not Bullets, but maybe Blurrs? […]...
  • Athena Catalog Mega Drop – Skate and Annoy: […] stock. Starting at the top, some helmets that appear to be based on designs from Norcon and Cooper. I suppose it’s possible they were the original manufacturers of those helmets, Coope...
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...