Skate and Annoy: Daily

New southern oregon skateparks

Great, more rippers from southern Oregon

Remember all those ripping skaters who came out of southern Oregon? Well I’m guessing we can expect a new crop in the near future. Matt Kline sent us some snaps of a couple of projects currently underway: Shoey’s Coos Bay, Oregon and Grindline in Myrtle Creek, Oregon. Dreamland’s Winston, Oregon project is also rumored to break ground in the near future. More shots after the turn.

Matt says the finish work at Coos Bay is looking very good and hey, vert!


Yep, Coos Bay will have a cradle.


Oh man, where are my eighteen inch tall ledges?


Meanwhile, Grindline is building this one in Myrtle Creek.


Brings to mind Grindline’s Dillon, Montana skatepark. Estimated 14-foot-diameter pipes, racetrack!

13 comments.  

Leave a Comment

12 comments

  • nweyesk8

    is this on top of the old myrtle creek park? Is there two parks there when this one is done? will we see a Oregon Skateboard/motocross hybrid race series start up in Oregon?

  • The madness just doesn’t stop. Wait until the next coastal road trip!

  • It looks like Myrtle Creek will be hosting the annual Grover Death Race series. These parks look fun. Hey Skaters for Portland Skateparks, we need this kind of stuff here in Portland.

  • California is Dead, The center for skateboarding is oregon. Ten years from now there will be more pros from oregon than any other country or state,the level of skateboarding in oregon is un-matched.

  • A

    Myrtle Creek isn’t listed on Grindline, but Coos Bay is. Shows a lot of street elements in the plan. Looks fun.

  • Concrete Warfare

    Ok I guess the word is out on Coos Bay. The grindline plans are gone. There just wasn’t enough money raised for them. So the South Coast Locals got together and decided to build with what little money there was. So this park is Designed & built by locals For Locals.

    A dedicated local In Coos Bay

  • am i really seeing 3 fullpipes in one park? looks like a fun crash-up derby course

  • nweyesk8

    Salute to the south coast locals for building themselves.

  • There was a kid from Ashland, Tyler something, that was tearing it up at the Tim Brauch contest last weekend

  • Hey cold ones that would be Tyler Martin. Check it out: Tyler on EPM

  • Skated 16 parks in 5 daze recently and Myrtle Creek, Coos Bay, Winston,Matt’s Pool were all the best!!! Thank You Northwest!! We got Roosevelt and Cunningham in San Jose, Oregon and Montana are still my faves though!!! Montana here I come!!
    Skate and Rawk!!!

    RS2

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Kilwag: Cool thanks. I'll look him up and add him....
  • Tom: The rider in the advert is Davie Phillips (sp?) one time co-owner of Clan Skates (likely including when this advert was made). Skated for Zorlac I think....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Ashley del Cueto: How can I get a copy of this Ad?...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • rriddle3: In the early '60s in the area now occupied by the IH20 and IH35W interchange, was a huge pile of sawdust that contained seconds from Nash Skateboards. A friend and I would dig through it and take the ...
  • Brad: Looks like a piece of crap, intended to take money from suckers. Oh wait. Yeah, save your money and buy some silver bullion instead. ))...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Lana: We just found one of these in overgrown brush! It still squeaks! I have no idea how old it is! 😆...
  • Lee Marlar Marlar (Janis): Where can I still buy one? I’m 76, this thing is GREAT for us older folks to practice Balance!! MUCH BETTER THAN WHAT THEY USE FOR AT REHAB CENTERS! I can use it in my house! Please, Please bri...
  • Dave: You can see what the wrench part of the Elephant tool was actually made for; I never could figure it out from just looking at 80's trucks lol...
  • Norm: Makes sense, you can only keep making novelty eggs bigger to a point until they're just skimboards. Had to design something to jump the shark with I guess. Looks fun enough in that ride it once for ...
  • Cheyne Cottrell: Island Water Sports is actually based in Deerfield beach Fl, located on the barrier island! We're still around. In the 80's we went huge and open 30 stores, all over the US with a couple huge events ...
  • Juan Carlos: Yo tengo la misma, (l have the identic skate...
  • Dennis Allgeie: I have this stick on an original Oaks East skateboard that was bought from Dorsey Truitt at the Atlantic Skates Shop in OCMD! A totally prized procession ....
  • Maria Farr: Hi, if anyone out there has one of these items, we are desperately in need of one for our autistic grandson. He had one which got broken, and all he wants is a replacement. I’d gladly pay somebody...
  • Kilwag: I uploaded better scans of this ad. I don't have any Fantasy Skates stickers in the sticker gallery, if you ever get around to scanning them send them to me so I can add them,...
  • Kilwag: That's great! Upload that VHS footy and post a link!...
  • Raymon D White: Man this brings back memories. It was strictly Vans, and Nike high tops before Vision came out with their shoes. I gave them a shot as my first deck was a Gator, then a Gonzalez. Loved Vision, and ...
  • Whane: Jason is still alive and well (he's not THAT old haha). A few years back his mom passed and he managed the sale of her property but he himself lives further North now. We found some super old and grai...
  • PiNG!: LoNG TiME SNA FaN, THaNKz So MuCH, MuCH RESPeCT !!!...
  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....