Note: this search box only works for area of the site you are in.

If you're in t Daily, it searches Daily. If you are the Galleries, it searches the Galleries, etc...

Skate and Annoy: Daily

Comet Skateboards on Invention Nation

Green is the new black

There are quite a few bamboo based boards out there. According to some sources (more on that in a few) the skateboard industry has surpassed the hardwood floor industry as the number one world consumer of hard maple trees. lets put that into perspective. If properly cared for, a hardwood floor can last 100 plus years in house, while a skateboard isn’t going to last a year unless you’re just using it for transportation. Now consider that a maple tree takes 28 years to mature for use commercially. Sustainability is big in industry right now. It’s even creeping into skateboarding, mostly through the red headed stepchild of skateboarding, longboarding. I’ve seen a few of them up close and they don’t look quite ready for prime time, at least as far as short boards go. It sure would be great if a decent shortboard could be made out of bamboo. There’s a TV program on the Science Channel called Invention Nation where a bunch of hippies the show’s hosts travel the country in a biodiesel powered van and investigate cottage industry inventors of green technologies. It’s a short bus, but it’s green, not yellow. Comet Skateboards was featured on the Less Landfill episode for work on a bamboo composite board. It doesn’t air again until March 17, but you can watch it here.

Comet’s sustainable skateboards.

Comet’s green board technology is called Biohip and Biopop. Near as I can tell, they are one in the same, differing only in the type of board that gets made. The web site is slick, but doesn’t do nearly as good of a job explaining the technology as the short Invention Nation video does. Basically, they’ve got hemp fabric that is soaked in a soy protein that reacts to heat in pressure in a way that makes it stronger than traditional wood. The hemp-soy sandwiches a bamboo core. I forgot to mention that the glue is not petroleum based like most skateboard epoxies are. It looks like they are making a traditional board out of this too. I wonder how they last.

Comet Skatebaords on Invention Nation

Find out more about Invention Nation on the official site.

A few points of interest: It’s pretty amazing how stiff that fiber becomes almost instantly. They’ve taken the in press time down from hours to minutes. In theory, that could make them cheaper, as long as the materials aren’t more expensive. More on that later.

The boards in the video are not the ones in their current product lineup. Comet’s production boards still have 4 plies of maple in addition to the three plies of environmentally sustainable and inert materials. Does this mean an all bamboo and hemp composite board can not pass standards? I realize they did a rush job for the sake of the video, but the finished board is a little ragged on the edges from the frayed fabric. The other bamboo layered longboards I’ve seen seem to have very fragile edges.

It looks like they are licensing the technology from a company called e2e Materials. They must keep a tight reign on it because the segment was shot in Ithaca New York instead of San Francisco where Comet is actually based. Makes you wonder about the less-than-green practice of manufacturing on the east coast and warehousing on the west coast. Maybe that was just the test facility or the decision to film there was based on the logistics of where they were touring. The technology seems extremely promising, but who knows how restrictive the licensing agreements are. e2e has to make money, and Comet needs to differentiate themselves from their competition, but I’d hate to see a situation like.. I don’t know, suppose you made an HIV vaccine and then licensed and priced it out of reach of the poorest people who need it the most… Sounds crazy right? Yes, comparing environmentally sustainable skateboard manufacturing processes to an AIDS vaccine is not appropriate, but you get the picture. If the technology can help keep us from treating the world’s forests like one giant corn field, then we all ought to be using it. It’s a good thing they don’t have Canadian Maple forests in Iraq…

16 comments.  

Leave a Comment

16 comments

  • i agree with aron another good page

  • A

    Bamboo skateboards will help you land a 900 and get laid too. They are the best thing in the world.

    Come on dude, instead of spamming the comments, how about sending a board for review?

  • Wow, dudes are hyped on those bamboo boards!

    Well, its either that or a serious spamming effort….

  • Chris Kemmer

    Bamboo Decks. What can i say bamboo has done it again. Leaving there mark on skating society. I havent seen decks as good as bamboo. The are stronger than a regular deck that costs 50$. Ride smooth nice pop. The structure is nice, many sizes. Youve outdone yourself bamboo. keep it up

  • wood is the new metal now too, just as innovative and creative. these boards are a great example of what possibilities skateboard companies can come up with. this company has done a great job with this creation

  • jesse byrne

    hey i skate bamboo decks only because they last longer and never get warped if i was you i would only
    skate bamboo decks

  • Interesting.

  • Yeah, bamboo skateboards would be super swell – UNTIL SKATERS STARTED GETTING MAULED BY HUNGRY PANDAS! Think things through next time, guys.

  • Good stuff Kilwag, especially good when I get to call you a hippy. I did notice the longer hair too. Probably long enough for a pony tail or possibly pig tails.

    When is the cold war Bamboo “It’s all good” model coming out.

    If you need a fat tester, I am in.
    SF

  • If they really want to test bamboo boards out they should give one to my friend Mike who’s 6′ 7″. He skates street and breaks boards like toothpicks even on simple flatground tricks. If he can make a bamboo board last more than a month then that’s all the testing they need…

  • I have a Lush longoard (44″) that is bamboo. I love the thing, and its beatiful to look at too. Not sure how it would work out for a vert board, but I suspect it could be just as good as maple…

  • Bamboo grows like a weed though. They don’t need to cut down rain forests, they can come into my yard and harvest the stuff that keeps creeping in from my neighbors yard.

  • Bamboo is usually great from a sustainability standpoint, as long as rainforests aren’t being cut down to open up land to plant more of it (similar to potential ethanol and biodiesel issues with corn, soy, etc.). If demand for it gets much greater, it will no longer be sustainable. All of that depressing stuff said, bamboo’s physical properties should lend themselves well to skateboards. Very light, very strong and durable, very stiff when laminated… I’d like to try one.

  • Another Enviro friendly skate company, and local, for me at least.

    THE LINK

  • Now green is the new black? It’s hard to keep up.

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...