Note: this search box only works for area of the site you are in.

If you're in t Daily, it searches Daily. If you are the Galleries, it searches the Galleries, etc...

Skate and Annoy: Daily

Vancouver Park Opens

Vancouver Washington is legit.

There’s no need to barge the scene, Vancouver’s new skate park is now officially open. I got there late this evening as what seemed like half the Trifecta was getting ready to pack up, including Benji Galloway, Rune Glifberg, Sergie Ventura Chris Cudlipp, Josh Sandoval, Morgan Burgess, Tyler Mumma and I think Devon Lamb. I heard Tyler, Rune, and possibly someone else made it (that day) carving over the top face of the capsule! Not a bad demo for an unanounced opening day! Joe Hammeke was there with a bunch of lights, but until those Indy Kickflip shots of Rune get published you’ll have to settle for old Kilwag’s photos, that is unless Rich from EPM got anything. (Update: He did.) Grover and he were pressing glass this afternoon when the park opened. The park is a lot of fun, barring the recurring dust storms blowing in off the uncovered dirt in the surrounding unfinished areas. That’s Cudlipp above with North Portland locals Xavier and Doug in the. See larger versions after the jump.

Vancouver Washington opening day.

Click fuzzy thumbnails to enlarge.

Below: Chris Cudlipp
Vancouver Washington opening day.

Below: Tyler Mumma. Checkout Screech’s circa 1988 Vision Skate Escape t-shirt. My money is on reissue because it’s in awfully good of shape.
Vancouver Washington opening day.

Below: Doug from Portland
Vancouver Washington opening day.

Below: Xavier from Portland
Vancouver Washington opening day.

Below: Hasty panorama
Vancouver Washington opening day.

Artsy Fartsy Outtakes

Because I have no self control, and hard drive space is cheap. Should have focused on the action, but I thought it’d try the foreground intsead.

Below: Screech
Vancouver Washington opening day.

Below: Chris Cudlipp
Vancouver Washington opening day.

10 comments.  

Leave a Comment

10 comments

  • the park is so good, I had so much fun…very good lines in there.

  • Parks on NE 18th about 150 yards east of the 164th/NE18th intersection. From Portland you can take the 205 North to the Camas/Hwy 14 exit. Head east to the first exit which is the 164th street exis and go north until you reach NE 18th. Turn right onto NE 18th and the park is on the left handside of the road. It’s currently in the middle of a construction area while the rest of the general park is being built. Note that NE 18th is north of Mill Plain. Don’t be tempted to turn on SE 18th.

  • A

    Oh yeah… street area. I’ll snap some next time. It’s small. Very small. packed full of bikes. They have an expansion planned though. Don’t know how that is coming though.

  • So what street is the park on exactly?
    Kinda looks like 164th? Love the the site also
    keep up the good work.

  • A

    Seriously. I couldn’t remember the exit I needed to take so I went to your site to get the map link. Did the same thing when I went to Battleground for the Trifecta.

    Yes. We are spoiled. This is the golden age. Or would be, if I was 10 years younger.

  • Ha HA HA!!!! Do what I do! Ha Ha HA!!!

    Hey! Stop this now! There’s too much concrete already! I’m heading to Bellingham and can’t be distracted by yet ANOTHER skatepark!

  • thanks for the pic man

  • cool thanks Randy, I’m gonna swing by this morning.

  • A

    Dang, do what i do, go to Northwest Skater, look it up, and follow the map link

  • direction to the park? or address?
    thanks.

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...