Skate and Annoy: Daily

Team Pain builds in Englewood Florida

Englewood Florida skatepark progress

Team Pain sent in a few pics of the Englewood Florida skatepark that is under construction. If that name sounds familiar, it’s because we covered it in January when a woman donated 200k to the mysterious project. I say mysterious because the only web presence for the city seems to be owned by a newspaper conglomerate that publishes for several small towns in the area. There is vague, limited information about the community. If I lived there I would find it kind of disturbing to have my town’s official news dissemination in the hands of a private company. But I’m getting way off track here. There are more pics and enlargements after the jump.

Englewood Florida Skatepark Construction by Team Pain

I can’t find a layout of this park anywhere. If you know where one is please send it in. There are a few more construction pics from earlier in the process over at Concrete Disciples. I don’t think I’ve ever seen a skatepark under construction where they pour the flat bottom of a bowl before the tranny, but you can see that’s how Team Pain does it if you follow the link.

Update: Link to the J.M. Berlin Rotary Skate Park MySpace page thanks to commentor Ed who says it’s not up to date at this time.

This photo was taken 2007 B.C. (Before Coping!)

Team Pain builds a skatepark in Englewood Florida

And this one is after coping.

Team Pain builds a skatepark in Englewood Florida

Part of the street course

Team Pain builds a skatepark in Englewood Florida

Part of Team Pain, James Hedrick in the bowl.

Team Pain builds a skatepark in Englewood Florida

A very nice looking brick bank under construction.

Team Pain builds a skatepark in Englewood Florida

James Hedrick again. I guess it works…

Team Pain builds a skatepark in Englewood Florida

Fun for all ages!

Team Pain builds a skatepark in Englewood Florida

38 comments.  

Leave a Comment

38 comments

  • Travis Smith

    why closed skatepark ?? I want open now!!!!!!

  • eric wood

    Shut the fuck up cher. No one like you. Go visit your trucker husband.. By the way you have a big ghetto booty. Eww. Ure son keegan sucks at skatin. By the way.

  • Cher Harlacz

    I am in the process of moving to Venice Florida and saw that Engelwood is in the process of buildiong a skate park where is it located?? We are formly from Engelwood.

  • another well built park ruined by the local government. do away with the fence and pad rule and this will be a quality destination park that attracts good skaters. Though i will be living near this park, I will never come here to skate due to the above mentioned rules. id rather skate flatground all day than wear pads at the best park in the world; any skater out there would agree with me (except maybe for vert dogs who, for good reason, wear pads regardless). Skateboard parks should be treated no different from a baseball field, basketball court or any other sport field, none of which have set hours or safety rules. the most common skateboard injuries (broken and sprained ankles and wrists, broken tibias, radii and ulna, and bruised hips and shins) are not going to be prevented by a pad rule anyways.

  • They want a destination park but they don’t even put waivers online for peeps to download. I have to drag my nephews there and fake the waiver and hope it’s cool. Another great park run by idiots. But nice job Team Pain, you guys rock as usual!

  • looks pretty sick, im going to florda soon… im not sure where but maybe ill get to skate here

  • A

    Wrong site dude.

  • justen jones

    sorry started to read more and found out my own ? but i do have another will there be any events in the future for bmx freestyle

  • justen jones

    will bikes be allowed if not please reconsider

  • Linda D.

    What are the hours, and prices? Long way to drive to have it closed.

  • I’m gonna come down there and thrash that place for all it worth, looks like a bad ass tripple pumping bowl for all
    diferent kinds of shit to go on ;zzlive liver moves with some big outti airs going frontside in just that right spot in da triple howl i gonna tear that bowlie up, look for me i’ll be the tall skinny ududer with long hair. Sksate on
    yous dudus at that park !!!h

  • oh and they are reall, yes real real as real as it gets bricks

  • dude i have been to this skatepark.my house is right next to it, its in oyster creek.dudddddeee, this park rocks, opening day was awesome!i got in all week for free. the only bad thing is that u better pack your pads because u haft to have them aaaalllllllllllllll. there talking about making it free and public tho so idk

  • bikes allowed?

  • i hate this park
    everyone is a prick and
    you need all your pads
    id reather go to north port than this one

  • do u hav to sign a waiver?
    pads?

  • when will the park be open and what’s the adderss

  • The park is sick and yes it is real brick on those banks. the place is awesome and i have skated quite a few team pain parks across florida and this is by far the most fun. good thing it is only 10 minutes from my house!!check out the ariel pics on the team pain site http://www.teampain.com/flash/news/

  • Hi all,

    my name is Marc and I will spend my summer vacation in Venice, FL.
    I hardly can’t wait to skate in your beautyfull park.

    CU
    Marc, Germany

  • Hey, guys. Check out the englewoodrotary.org web site for more info. The 3 local Rotary clubs put in the man power to raise the additional funds for this great park. We still have $300,000 to go. The grand opening is Saturday, July 14th at 9:30am. It is located on San Casa Drive in Englewood. Be one of the first to skate it!

  • Flat spot simulator!

  • A

    So how are you getting the grout lines? Are they grouted after the bricks are dyed and stamped?

  • it is stamped. not real bricks.
    real bricks would carry too much maintenance and
    would have too many imperfections.
    with stamping you can control the depth of the grout lines so that you still get the feel of bricks but with a more level surface…

  • Bricks: From what it sounded like, its a big stamp. I don’t know, maybe Tito can describe the process. Whatever the case, sick idea and a sick park.

  • Don’t know anything about concrete. What kind of concrete and how do you set the bricks. Tito? I’m serious.

  • The actual name of the park is the J.M. Berlin Rotary Skate Park named after the lady who donated the money in her husbands name. They do have a myspace page although it’s not current. Check it out at myspace.com/jmberlinrotaryskatepark. ED

  • I want to build a micro version of that on my patio.

  • A

    Bricks: So each fake brick square is died individually? Do you tape off the mortar lines or are they stamped like 3D bricks died and then mortared? Sounds like a lot of work. Is it textured?

  • there are no expansion joints in there.

    What you see are saw cut joints designed to control cracking that is typical in this type of structure.. can’t even feel them.

    fun park, 18,000 sq ft two bowls huge street and then some…

    the park will be finished this month. Not sure how they will run it.

    However they are wanting a “destination” park. So feel free and contact the city and tell them how destination parks work best if they are free.

    Thanks for all the good words guys…

  • Sure are a lot of seams in that bowl. Are expansion joints a bigger deal in Florida?

  • Yeah, James lives right down the road from me. He explained the process to me. Its like those driveways that look like flagstone, but are actually just etched and dyed concrete. Its cool how they added an aged look by varying the finish. He keeps telling me specialty concrete work like this is the wave of the future. Concrete nerd for sure.

  • A

    Hmm. Check out the grout. Do you think that’s really faux brick? Looks real to me, more real than the fake brick I’ve seen.

  • Faux brick = super sick!! We might do that at our diy thingy here, cause that dude up top is down.

  • The China Banks replica looks really cool. I suppose most parks do the flat in bowls last to discourage poaching? Keep an eye out for the city of Dunedin’s park… we’re next!!! : )

  • thats sick, team pain has always built good stuff but they’re stepping it up with this. i wonder if there will be pad nannies like at other florida parks.

  • Just build a snake run similar to that bank at Gabriel Park.

  • cool bank, china banks anyone?

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...