Skate and Annoy: Galleries

Mr Bennett Alligator Wheels (B&W)

This advert may look familiar, there’s a 2 color version of it too.

Mr. Bennett’s Alligator Wheels are flat-out the best, and he has the facts to prove it!

YOU HAVE A CHOICE
LOOSE BALL SERIES
PRECISION BEARING SERIES

ALLIGATORS are the only LOAD-RATED” wheels in the world. All stoker size on the outside, with three different tread/weight configurations inside. G-3, for riders 75 lbs. and under. 0-4, 75 lbs. to 150 lbs. G-5, 150 lbs. and over. Use combinations front and back, or for variable conditions in freestyle, slalom, and downhill. All for optimum performance with no change in center of gravity or “feel” of board.

100%, PURE CLEAR URETHANE – the best money can buy. No cores, no fillers, no junk. Not pop injec-bon molded, not poured in cheap open cavities, but COMPRESSION CAST’. by Mr. Bennett’s exclusive process that puts the lid on the pour to create a perfect backside, front side, and true precision roll.

PRECISION MACHINED, heavy steel sleeve insures perfect, wide spaced, parallel alignment of inner and outer bearings. An absolute must for maximum speed, bearing life, and even wear.

TURBINE” BEARINGS are ultra precision, aerospace quality, sealed on BOTH soles. Keeps dot out and the lubricant in. Quiet, smooth and swift!

EXCLUSIVE “RADIAL TIRE” ACTION outgrips any “paw” type wheel, and out runs any conventional design. Why? Simple! The outer TREAD sections of BOTH sides of Alligators conform to, and grip any surface better by flattening out in tight turns for maximum traction, yet roll faster on the narrow it “HUB” section for top downhill speed and effortless cruising.

SOFT SHOULDER . inner tread eliminates hard edge “chatter” that breaks traction and causes 90% of all power turn and slalom wipeouts.

ALLIGATOR LOOSE BALL SERIES – All the features of the TURBINE’. series but with a solid, precision machined, NO-POP’. single piece race cup. Guaranteed not to loosen or come out for the life of the wheel! Same load-ratings – same good urethane.

SET of FOUR, ALLIGATOR TURBINE Series (complete) . . $30.00

NOTE: Turbine series will not fit roller skate size trucks. If you do not have high performance trucks, please order below

SET of FOUR ALLIGATOR Loose Ball Series (fit all trucks) $16.00

BENNETT HIJACKER TRUCKS, per set $12.95

ALLIGATOR HIJACKER T-shirt (top quality w/pocket, inc. postage) $5.50

Add $1.50 postage per set. $3.50 for Hawaii, foreign or airmail.
California Residents Add 6% Sales Tax

CASHIERS CHECK OR MONEY ORDER ONLY TO:
MR. BENNETT, P.O. Box 1415-S, Newport Beach, Calif. 92663

DEALER INQUIRIES WELCOMED

0 comments.  

Leave a Comment

Leave the first comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Athena Catalog Mega Drop – Skate and Annoy: […] This profile looks familiar too. Not Bullets, but maybe Blurrs? […]...
  • Athena Catalog Mega Drop – Skate and Annoy: […] stock. Starting at the top, some helmets that appear to be based on designs from Norcon and Cooper. I suppose it’s possible they were the original manufacturers of those helmets, Coope...
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...