Skate and Annoy: Daily

Naples Snake Run

New snake runs are an old new idea.

Oregon just got one in Lincoln City, and we’re getting one in Portland later this year. Hell, they might be breaking ground as you read this. In Florida, they don’t have the hills that we do, so they have to make due. The Edge skatepark in Naples was finished a couple years ago. Team Pain is working on another one in St. Lucie, Florida right now. It’s actually mostly street terrain, but it does have a little snake in it. They have some construction pics of the work in progress on their news page.

– Thanks to Tito for the pic.

8 comments.  

Leave a Comment

8 comments

  • Team Pain should build a park in the N.W., they’ve always looked good.

  • I skated a couple Team Pain parks that were built around 2000, they were good then so i assume they have only gotten better.

  • A

    I have skated a few as well, built a few years back. They seem well constructed with good finishing. I’ve had fun, but I wasn’t completely sold on the layouts. The ones I’ve skated were built in places with a high water table, so instead of getting deeper in the deep end, they would just get taller. That bugs me, but it isn’t their fault. If they dug deeper they would be under water constantly, even with a sump pump.

    I have a built in preference for the NW builders and their style, so I judge other parks against that. Not very impartial. That being said, some of the more recent Team Pain parks look great (from the internet.)

    I prefer TP to the Site Design parks I’ve skated. The SD parks were all finished well, but they lacked any sort of creativity or personality. Almost like a prefab concrete park, everything was the same size and as a result, boring after a while.

    You guys are going to get railed on for suggesting a non NW company build a skatepark in Portland! You’re not allowed to say that unless you are a street skater!

    19 spots… I ‘d like to see one go to each major (credible) skatepark builder out there (NW included) , and the rest go to NW companies. It would be unique for sure, one city to skate a variety of parks built by a variety of build/design companies with different design philosophies. I don’t believe that exists anywhere right now.

  • Team Pain parks are good! I’ve skated three of them in Michigan. They are head & shoulders above Site Design.

  • We call them “Snake Zones”

  • A

    Snaking zones we have plenty of!

  • Its just different styles. I don’t really like the gigantor bowls with lots of tranny in the NW. I’d rather ride weird street stuff and the swimming pool replicas that TP is doing.

    At least now, in this day and age, we can be snobs, and have preferences, instead of being hyped to drive an hour to skate a prefab park.

  • Richmond VA has a snake in the design, as well as a 70′ long ditch that varies in heights as it empties down into a bowl

Leave your comment

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Kilwag: Yeah, Tony looks a little bewildered....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Diogo Aires Carvalho Silva: Fofão is a children’s character from the Brazilian TV show Balão Mágico. He became so popular that he eventually got his own TV show. He was created and played by Brazilian actor and comedian Ori...
  • Kilwag: Cool thanks. I'll look him up and add him....
  • Tom: The rider in the advert is Davie Phillips (sp?) one time co-owner of Clan Skates (likely including when this advert was made). Skated for Zorlac I think....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Ashley del Cueto: How can I get a copy of this Ad?...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • rriddle3: In the early '60s in the area now occupied by the IH20 and IH35W interchange, was a huge pile of sawdust that contained seconds from Nash Skateboards. A friend and I would dig through it and take the ...
  • Brad: Looks like a piece of crap, intended to take money from suckers. Oh wait. Yeah, save your money and buy some silver bullion instead. ))...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Lana: We just found one of these in overgrown brush! It still squeaks! I have no idea how old it is! 😆...
  • Lee Marlar Marlar (Janis): Where can I still buy one? I’m 76, this thing is GREAT for us older folks to practice Balance!! MUCH BETTER THAN WHAT THEY USE FOR AT REHAB CENTERS! I can use it in my house! Please, Please bri...
  • Dave: You can see what the wrench part of the Elephant tool was actually made for; I never could figure it out from just looking at 80's trucks lol...
  • Norm: Makes sense, you can only keep making novelty eggs bigger to a point until they're just skimboards. Had to design something to jump the shark with I guess. Looks fun enough in that ride it once for ...
  • Cheyne Cottrell: Island Water Sports is actually based in Deerfield beach Fl, located on the barrier island! We're still around. In the 80's we went huge and open 30 stores, all over the US with a couple huge events ...
  • Juan Carlos: Yo tengo la misma, (l have the identic skate...
  • Dennis Allgeie: I have this stick on an original Oaks East skateboard that was bought from Dorsey Truitt at the Atlantic Skates Shop in OCMD! A totally prized procession ....
  • Maria Farr: Hi, if anyone out there has one of these items, we are desperately in need of one for our autistic grandson. He had one which got broken, and all he wants is a replacement. I’d gladly pay somebody...
  • Kilwag: I uploaded better scans of this ad. I don't have any Fantasy Skates stickers in the sticker gallery, if you ever get around to scanning them send them to me so I can add them,...
  • Kilwag: That's great! Upload that VHS footy and post a link!...
  • Raymon D White: Man this brings back memories. It was strictly Vans, and Nike high tops before Vision came out with their shoes. I gave them a shot as my first deck was a Gator, then a Gonzalez. Loved Vision, and ...
  • Whane: Jason is still alive and well (he's not THAT old haha). A few years back his mom passed and he managed the sale of her property but he himself lives further North now. We found some super old and grai...
  • PiNG!: LoNG TiME SNA FaN, THaNKz So MuCH, MuCH RESPeCT !!!...
  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...