Skate and Annoy: Daily

Naples Snake Run

New snake runs are an old new idea.

Oregon just got one in Lincoln City, and we’re getting one in Portland later this year. Hell, they might be breaking ground as you read this. In Florida, they don’t have the hills that we do, so they have to make due. The Edge skatepark in Naples was finished a couple years ago. Team Pain is working on another one in St. Lucie, Florida right now. It’s actually mostly street terrain, but it does have a little snake in it. They have some construction pics of the work in progress on their news page.

– Thanks to Tito for the pic.

8 comments.  

Leave a Comment

8 comments

  • Richmond VA has a snake in the design, as well as a 70′ long ditch that varies in heights as it empties down into a bowl

  • Its just different styles. I don’t really like the gigantor bowls with lots of tranny in the NW. I’d rather ride weird street stuff and the swimming pool replicas that TP is doing.

    At least now, in this day and age, we can be snobs, and have preferences, instead of being hyped to drive an hour to skate a prefab park.

  • A

    Snaking zones we have plenty of!

  • We call them “Snake Zones”

  • Team Pain parks are good! I’ve skated three of them in Michigan. They are head & shoulders above Site Design.

  • A

    I have skated a few as well, built a few years back. They seem well constructed with good finishing. I’ve had fun, but I wasn’t completely sold on the layouts. The ones I’ve skated were built in places with a high water table, so instead of getting deeper in the deep end, they would just get taller. That bugs me, but it isn’t their fault. If they dug deeper they would be under water constantly, even with a sump pump.

    I have a built in preference for the NW builders and their style, so I judge other parks against that. Not very impartial. That being said, some of the more recent Team Pain parks look great (from the internet.)

    I prefer TP to the Site Design parks I’ve skated. The SD parks were all finished well, but they lacked any sort of creativity or personality. Almost like a prefab concrete park, everything was the same size and as a result, boring after a while.

    You guys are going to get railed on for suggesting a non NW company build a skatepark in Portland! You’re not allowed to say that unless you are a street skater!

    19 spots… I ‘d like to see one go to each major (credible) skatepark builder out there (NW included) , and the rest go to NW companies. It would be unique for sure, one city to skate a variety of parks built by a variety of build/design companies with different design philosophies. I don’t believe that exists anywhere right now.

  • I skated a couple Team Pain parks that were built around 2000, they were good then so i assume they have only gotten better.

  • Team Pain should build a park in the N.W., they’ve always looked good.

Leave a Reply to Aaron (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...