Category Archive: Skate

Grow Anthology looks good on paper

So essentially these boards are made out of plastic resin and paper composite, some of it post-consumer waste. Each board sold means a tree planted, so sustainability is important to Grow Anthology. Oddly enough, they aren’t blabbing about it all one the web site. You actually have to look around for it. More than likely, this composite material isn’t viable for your average ledge, stair or rail skater, but for campus cruisers and transportation… Sure, why not. Now your coffee and your skateboard can be Rainforest Alliance certified. Made in USA to boot.

Source: Plastolux – Thanks to Va for the tip.

Read more...

SOTW 3-19-12: Rolf Hanson

This week’s Shot of the Week is is Rolf Hanson in Lindon, UT, taken by Gage Thompson. Once again, it’s a vertical shot so you must enlarge-o-rama to get the full frame.

Read more...

SOTW 3-12-18: Denny Guenther at Woodward

This week’s Shot of the Week features Denny Guenther from Raleigh, NC, although the photo was shot in Woodward, Pennsylvania by Jer Warren.

Read more...

Sponsor Luv: Travis Augustine for Merde

Merde-y Merde merde. Travis Augustine flows on flow in Klamath Falls, Oregon. Holy cow, I guess the skatepark is still open. What’s the sitch, Egbert? “M.” “ake.” “Make.”

Read more...

Another dinosaur

There’s more than one paleolithic skatepark out there waiting to be re-sessioned. This one near St. Jean de Luz, France might require a mountain board with some 100mm 55a wheels to get rolling. The asphalt looks very pitted. Pretty mild terrain for a skatepark, even by 70’s standard. Maybe the bigger stuff is under the dirt. Check it out on, errrr… FatBMX.

Read more...

Arvada Colorado pics

Forgot to post these actually, from the Team Pain park in Arvada, Colorado. Photos courtesy of COSkate.com. A nice video montage too, after the jump.

Read more...

SOTW 3-5-12: Rex in Battle Ground

This week’s Shot of the Week is from Micah Breshears. It’s Rex Pearson at Battle Ground, Washington. The thumbnail above is cropped horizontal. Too tall for the front page, so hit the enlargement.

Read more...

Sidewalk Shop

The Sidewalk Shop is an excellent place if you’ve got a fetish for pre-urethane wheeled skateboards and/or crows. I only wish they’d credit the source of the old photos and let you enlarge the images of the old boards. Definitely worth spending your time there.

Read more...

I’m busy

I’ve got a couple milk crates worth of old urethane skateboard wheels that I’m not sure why I saved, or what I thought I was going to do with them. I have used about 12 sets of them to stack screens freshly coated with emulsion for screen printing, but that got annoying so I built a drying rack. I have I’ve often wondered about all the wads of inert urethane buried in landfill. Sure, you can grind them up and mix them with fresh urethane or make earrings out of them, but it’s plastic, and eventually it just gets harder and harder, and the wold only needs a finite amount of lunch trays. Surprisingly, a species of mushroom has been discovered in the rain forests of Ecuador that can and will survive on polyurethane in landfill conditions, so you know, go ahead and enjoy your unalienable right to use urethane as you want. Hell, build a pipeline from Canada to pump wheels directly to your country. Good news, actually, but where are we going to build the urethane eating farms, and what the hell are we going to do with all those mushrooms?

Also, if you haven’t already noticed, I’m really busy lately, but hope to begin more regular updates next week.

[Source: Gizmodo.] – Thanks to Sean for the tip.

Read more...

Recreation Management

Outsider trade magazine articles on skateboarding and skateparks can usually be summed up by one or more of the following generalizations: uninformed, boring, misleading, or a steaming pile of excrement. When they aren’t it’s always because they were written by someone in the know, in this case, Portland skateboarding fixture Ben Wixon, who aside from being a teacher is also involved with Skaters for Public Skateparks and something called Drop Into Skateboarding, an organization formed by a few other names you might recognize. Aside from having a stimulating title, Recreation Management published an article titled The Evolution of Public Skateparks, written by Ben. You can read it online, or look for the cover at a very boring and/or thorough newsstand near you. What’s the takeaway? Two things. The push for more integrated spaces as opposed to an isolated facility in the middle of nowhere, and:

The experts surveyed unanimously agreed that concrete surfaces have overwhelmingly become the material of choice for skateboarding performance and durability.

It’s not a fascinating read, but you have to think of the target audience. The only beef I have is that it looks like they used a picture of a Skatepark in Indiana and label it as Phoenix. The second page has a photo of good ole Holly Farm skatespot in Portland. Man, I haven’t been there in ages.

– Thanks to John Aguilar for the tip.

Read more...

Skate and Annoy: Daily

Recent Comments

  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Zahid: Very informative article. Aluminium die casting is an excellent choice for producing lightweight and durable components, especially for electronics and industrial applications. Precision aluminium die...
  • Diogo Aires Carvalho Silva: Fofão is a children’s character from the Brazilian TV show Balão Mágico. He became so popular that he eventually got his own TV show. He was created and played by Brazilian actor and comedian Ori...
  • Kilwag: Cool thanks. I'll look him up and add him....
  • Tom: The rider in the advert is Davie Phillips (sp?) one time co-owner of Clan Skates (likely including when this advert was made). Skated for Zorlac I think....
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Ashley del Cueto: How can I get a copy of this Ad?...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • rriddle3: In the early '60s in the area now occupied by the IH20 and IH35W interchange, was a huge pile of sawdust that contained seconds from Nash Skateboards. A friend and I would dig through it and take the ...
  • Brad: Looks like a piece of crap, intended to take money from suckers. Oh wait. Yeah, save your money and buy some silver bullion instead. ))...
  • WooCommerce: Email "Cancelled order" failed to send: Invalid address: (From): ....
  • Lana: We just found one of these in overgrown brush! It still squeaks! I have no idea how old it is! 😆...
  • Lee Marlar Marlar (Janis): Where can I still buy one? I’m 76, this thing is GREAT for us older folks to practice Balance!! MUCH BETTER THAN WHAT THEY USE FOR AT REHAB CENTERS! I can use it in my house! Please, Please bri...
  • Dave: You can see what the wrench part of the Elephant tool was actually made for; I never could figure it out from just looking at 80's trucks lol...
  • Norm: Makes sense, you can only keep making novelty eggs bigger to a point until they're just skimboards. Had to design something to jump the shark with I guess. Looks fun enough in that ride it once for ...
  • Cheyne Cottrell: Island Water Sports is actually based in Deerfield beach Fl, located on the barrier island! We're still around. In the 80's we went huge and open 30 stores, all over the US with a couple huge events ...
  • Juan Carlos: Yo tengo la misma, (l have the identic skate...
  • Dennis Allgeie: I have this stick on an original Oaks East skateboard that was bought from Dorsey Truitt at the Atlantic Skates Shop in OCMD! A totally prized procession ....
  • Maria Farr: Hi, if anyone out there has one of these items, we are desperately in need of one for our autistic grandson. He had one which got broken, and all he wants is a replacement. I’d gladly pay somebody...
  • Kilwag: I uploaded better scans of this ad. I don't have any Fantasy Skates stickers in the sticker gallery, if you ever get around to scanning them send them to me so I can add them,...
  • Kilwag: That's great! Upload that VHS footy and post a link!...
  • Raymon D White: Man this brings back memories. It was strictly Vans, and Nike high tops before Vision came out with their shoes. I gave them a shot as my first deck was a Gator, then a Gonzalez. Loved Vision, and ...
  • Whane: Jason is still alive and well (he's not THAT old haha). A few years back his mom passed and he managed the sale of her property but he himself lives further North now. We found some super old and grai...
  • PiNG!: LoNG TiME SNA FaN, THaNKz So MuCH, MuCH RESPeCT !!!...
  • Michiel: You’re doing the lord’s work. Fantastic job....
  • Dave: I'm a bit late to the party here bit I've been packing for a move and come across my old skateboard. The plexiglass ThunderBoard. When I started looking it up l, this blog came up and I found the ar...
  • Kilwag: Mom was looking out for you!...
  • Justin: Doz’r, so bad… kinda glad my mom ignored my request for one....
  • BritSkateMuseum: Just wanted to say I love it when S&A comes up when I google something, thanks for all the work this last 20 odd years 👍...
  • Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?: Ciao, incredibile... io ne ho a casa uno uguale, mi era stato regalato da piccolo, quanto può valere?...
  • John Meaney: Hi by any chance do u have any others and would you be interested in selling one...
  • william mcgill: i am wearing that shirt right now...
  • Deborah: Feel free to reach out i can share info about my grandpa Cecil Schertz. And yes Aaron created the Native logo for him...
  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Buy Stuff

    Help support Skate and Annoy and keep the updates coming!

    Category Archive: Skate