Skate and Annoy: Daily

Myrtle Creek Oregon Skatepark

There’s something you don’t see everyday

Billy Runaway from Addikt Skateboards sent in a few snaps of the newly created Myrtle Creek, Oregon skatepark built by Grindline. An 8,500 square foot park is pretty darn good for a town with a population of 3,419 in the 2000 census.

Myrtle Creek, Oregon skatepark

Myrtle Creek Oregon Skatepark overview

Myrtle Creek, Oregon skatepark. Skater: Stefan Faure

Stefan Faure - Myrtle Creek Oregon skatepark

Stefan Faure - Myrtle Creek Oregon skatepark

Stefan Faure - Myrtle Creek Oregon skatepark

Stefan Faure - Myrtle Creek Oregon skatepark

21 comments.  

Leave a Comment

21 comments

  • Simply Stupid

    That park looks like a blast. I too miss the North West.

  • this park seem nice dudes
    even tho ive been there 2 years ago and i was bored as hell.yaa its big but man siriously i u lookin for a rad skatepark to do
    ExTReMMe STUNTS!!!i recCOMEND U DO BETTER fiNDInG ANOder PArk

  • sutherlin mike

    ya i like those fronside airs you were doing on the big wall dan! good stuff. It was good to see you at the park

    wow daddy yo really is a kook/moron maybe u shouldnt judge a park from a picture on the the internet although I doubt you will ever come here and skate it with your kook board. There is plenty of coping to grind in this park at mach speed. why do you care you cant even grind?

  • jakeferranti

    yeah, i cant really tell from the shots above,it wasnt a dig at the park design, rather just my observation that the roll in would seem to make sense there. that park looks fun to me.

  • There is plenty of speed in this park to hit the top of that wall with the pool blocks.

  • Nice pics Dan. Sorry I couldn’t make it down. Looked like the perfect day to skate. Who’s going to be the first to loop one of those pipes?

  • jakeferranti

    From the 1st pic taken at the top of the deck,looks like the only way to get decent speed to get to that pool cope, would be to roll from the top of the pipe directly across from it. i’d hit it.

  • Myrtle Creek was a blast! It’s the type of park that takes a while to figure out. Thanks!

    http://www.northwestskater.com/mc.html

  • enemy combatant

    “Are those supposed to be roll-ins on top?”

    Those are bike racks you dummy!

  • What is with those pipes in the middle? Are those supposed to be roll-ins on top?

    Roll-ins are for kooks. They should have made those transitions with coping on top.

  • Tom Miller

    Myrtle Creek is fun. Definitely a different set up with those three pipes in the middle. Probably the best finish on a Grindline park I’ve skated.

    Harrisburg was a wash-out for us this morning. It looked fun if overly programmed. There are some new, hybrid-style features. Plaza purists will be frustrated.

  • We should be driving through Portland around 9ish…

    Harrisburg sounds like a go too…

  • Ryan Heckler

    this park looks pretty Meh to me, where’s the race track?

  • Dan – What time will you be passing through Portland? I’m thinking about heading down there as well.

  • Dan, Make sure to catch harrisburg’s opening on Sunday.

  • Heading there Saturday… Anyone else? MC?

  • Stefan killing it!

  • sutherlin mike

    That park is wreaking me. weve been there everyday since friday. SO fun though.

  • Will Jones

    park looks rad

  • I miss Oregon man….we have one park like that for 3 states around here. Lucky bastards!

Leave a Reply to DaddyYo (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...