Note: this search box only works for area of the site you are in.

If you're in t Daily, it searches Daily. If you are the Galleries, it searches the Galleries, etc...

Skate and Annoy: Daily

Another Russian Skateboard

I can’ get enough of these Cold War era Russian skateboards. Here’s a board from 1986 courtesy of a cat named Jah Fish of Facebook. Translated text says the price was 26 Rubles, or about $34 possibly, according to some speculation found in various discussion on the internet. It’s impossible to say because you could not legally trade Rubles for dollars then. I have no idea what the buying power of 26 Rubles would be other than this skateboard. I’ve seen sources claim average monthly income in Russia would have been anywhere from 190 to 266 Rubles, so this skateboard would have cost about 12% – 14% of that.

Although it was made in 1986 (see translation below) the deck and trucks defiantly look like they are from the 70’s. The deck appears to be cut out of a thin sheet of plywood-like material, and looks completely flat. It’s hard to tell from the photo but hose might be open bearings in the wheels. What those wheels are made out of… who knows. Maybe composite, maybe some cheap rubber like this one has.

Unfortunately, I could not get any of the online image translators to recognize this text. Digging that clown on the packaging though. UPDATE: Translation provided by a reader named Jason, so thanks to him:

The type on the box reads “snaryad sportivnyy / doska rolikovaya / sportivnyy snaryad.” That is, “sporting goods” and “roller board”. Soviet package design was nothing if not straightforward. In modern Russian “skateboard” is simply transliterated into Cyrillic which is skeytbord with a Russian accent. But either that term wasn’t in wide use during the late Soviet era, or maybe more likely, the Soviets were a bit more protective of their language, à la the French. So it got the more russified, bureaucratic sounding title “Roller Board”.

I had better luck with the images below.

Ministry of Machine-Tool and Tool Industry of the USSR
T. 3. Moscow
PO Machine Tool Plant named after Sergo Ordzhonikidze
117908, Moscow, ul. Ordzhonikidze, d. 11

OCT 62-154-86 – Price 26 rub.
Price list 049-01-1975/264-MG
Article MG-049-01-736
Release date – Stamp open

3 comments.  

Leave a Comment

3 comments

  • Thanks for posting this, Kilwag. Love these old Soviet skateboards. Truly a fascinating scene.

  • Lovely. The type on the box reads: снаряд спортивный / доска роликовая / спортивный снаряд (snaryad sportivnyy / doska rolikovaya / sportivnyy snaryad). That is, “sporting goods” and “roller board”. Soviet package design was nothing if not straightforward. In modern Russian “skateboard” is simply transliterated into Cyrillic: скейтборд, which is skeytbord with a Russian accent. But either that term wasn’t in wide use during the late Soviet era, or maybe more likely, the Soviets were a bit more protective of their language, à la the French. So it got the more russified, bureaucratic sounding title “Roller Board”.

    • A

      Thanks. Adding this context to the main post. At first the Cyrillic text wasn’t showing up in post content due to a bad decision I made about the encoding on that database table some of 20 years ago. Unfortunately, changing the encoding worked but it also broke some of the WordPress blocks in existing posts so I had to revert back.

Leave a Reply to Jason (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...