Note: this search box only works for area of the site you are in.

If you're in t Daily, it searches Daily. If you are the Galleries, it searches the Galleries, etc...

Skate and Annoy: Daily

Z-ROLLER

Seller Notes: “dirty, it’s been used in the street…”

It’s just an auction or a single z-roller truck, vintage, yes, but not a big deal. It’s the auction description that is the best part, and it comes from S&A reader “Skater Dave” who is peddling some of his old gear to make up for lost wages due to a skateboard injury. While I have no scans of the x-ray, I do have the auction description preserved for posterity.

I’ve seen these with gray, black, yellow, and orange rollers. I’ve heard rumor of red years ago, but never saw one so I don’t believe it. Later they made them with metal rollers…there were way more of those made… god knows why… This was half of the only pair of orange ones I ever saw until I lost one… stupid, yes but certainly not the stupidest thing I’ve ever done in terms of screwing up future collectibles. Ranking right up there would be spray painting a Biniak Bullet fiberglass bottom, trading a Shogo Kubo Airbeam for a Malba K-Beam, then losing the K-Beam because I got wasted and left it somewhere, or simply failing to ever buy that beautiful Kanoa Surf deck with the routed out bits that looked sort of like the Sims Brad Bowman… What was that? The Lonnie Hiramoto model maybe? I heard that dude’s skating again. I bet even HE doesn’t have any of those anymore.

Aaaanyway, here is a single Z-Roller truck with two Powell Bones wheels. This is sort of a mixed era deal. Those of you who know will understand, and for those who don’t here’s why. The wheels are from the ’70s before we started to grasp the advantage of putting a nice radius on the front AND back of the wheel, in order to roll on and off of the coping without it catching. Not long after these Powell put out the Cubic, which had a nice fat radius front and back which reminds me of yet ANOTHER stupid thing I once did which was to buy some blue Kryptonics CX something or others instead of the Cubics… But the truck is from the ’80s and in my experience they showed up after the first wave of parks had almost all died out, most folks quit skating, then a whole new wave of kids picked it up again and wheels like this were already obsolete. Nevertheless, while trying to use these “trucks” I preferred this combo because I needed to be able to feel where I was in terms of what I was rolling on. I mean, with a conical or radius back wheel you’d get up on a curb or whatever and roll from wheel to truck-roller to wheel and never know what was touching and instead of grinding you’d go even faster and well, I just found the whole proposition sketchy as hell.

Oh yeah, the bearings in the wheels and trucks are also “vintage” which means I quit using them in the ’80s and haven’t tended to them since, so they’re pretty crunchy. I thought about replacing them but decided that would ruin the integrity of the offering as “genuine old school” 😉

Sorry I lost one, but this one’s for sale and it starts cheap: $0.03 and no reserve.

Shipping should be around $8.00 I think. I’ve never mailed one of these before…

If you buy this, and your wife gets mad because you spent too much on it and you have to ask for your money back, please do it within two weeks okay? And you’ll have to spring for the return shipping too, so don’t do anything rash.

Sorry to assume it’ll only be guys bidding on this, but I’m sort of biased towards believing women are smarter than men and wouldn’t be stupid enough to spend hard earned money on crap like this UNLESS you’re buying it for your skateboarder husband, in which case I say bid aggressively ma’am, bid with passion. Because you’re obviously intelligent, thoughtful, and the coolest wife ever… after mine!

Here’s a few more good ones:

Green Rails

Sword & Skull bonite edition.

14 comments.  

Leave a Comment

14 comments

  • Great listing Dave, I’m going to use the second last paragraph for one of my ebay listings… say it like it is maaaan!

    My silliest move as far as “losing” skategear goes; giving my cousin a skatebag stuffed with the following; Shogo Airbeam with Stage 1 indys and Alva conicals (pics on SnA somewhere of me on it..) and… a slightly worn out Alva Tri Logo, a set of Bell Air wings, a full set of Rector pads, a fullear Protec and some odd spares…ooops.

    • It sadly reminds me of a lost skate bag with my first Fibreflex, ACS 651 and matching blue & red Kryps …

  • *laugh*

    I have 3 sets. Not sure how I ended up with so many 😀

  • Dave, are those the green rails that Andy gave us a few years back?

  • Hey Dave ! I run a retirement home for old Kryptos – let them spend their final spring and summer where they belong …

  • no regret, no remorse : I used it up to my (limited) skills.
    Good memories & good times – sorry for you young dudes you were born too late, that’s all.
    A single Z is a buttman or luger’s dream.

  • ….cutting down my yellow, fiberglass Jay Adams to make a slalom board. right up there with you skaterdave

  • houseofneil

    great auction. But he took a lot of that last paragraph from one of my columns. But that’s ok. Great minds can think alike I guess! God luck with the auction my friend

    • I used nothing from any of your columns, but if or when I do you’ll get full credit. I never read all of any of them but I try to remember to scan most of most of them. I appreciate your work for sure!
      Now I’m probably going to have to go back and read all of all of them to see what you think I took…
      We’re either great minds thinking alike, or small minds working with the same data.

  • carvin marvin

    8 inch Alva with midtracks and green Kryptos, Salba K-beam with extracks and Sims Snakes and a bunch of mid 70’s junk (Logan Earth Ski, original OJ’s, Road Rider 4’s, ACS, Oak Street trucks, original Gull Wings, G&S Fibreflex, Z-Flex)
    all gone and no money

Leave a Reply to houseofneil (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...