Skate and Annoy: Daily

Thrown under the bus

My friend Mike Timble wilsoned his skateboard under a bus once, but this was the 80’s and he had an Uncle Wiggley argyle deck with an epoxy layer in it. It bent to the ground and popped right up, no worse for the wear. Such was not the case for Rod Evans. Max Headroom had an entry to win a weirdo and now we have pictures to go with the story.

9 comments.  

Leave a Comment

9 comments

  • My old Ken Park deck got ran over by a car in 1989 or so. Thing was fine. Either it was great wood or the car was a Kia.

    • ^ That was back when almost all the decks were made is the USA! Unlike those shitty Chinese popsicle sticks that they sell now.

  • masterochicken

    One time I was skating along a busy street and I hit a crack in the sidewalk. Board goes shooting into the street. I sit there hoping the cars won’t hit it when I notice something terrible. A truck actually swerves TO hit my board! The bastard! My board ends of getting hit 4 or 5 times. I get the board and one truck is bent and there is crack running 6 layers deep on one side and two layers on the other. I ride my board to the skateshop (it’s wobbling due to the bent truck. I get there and ask to use a unit so I can take my ruined truck off. He sees it and asks what happened and I tell him. He tells me that another just came in with a broken tensor so he threw the set in the trash. The shop guy pulls the good tensor out and gives it to me. I rode that board for a couple of months longer with on industrial and one tensor. It ended up going into the street again and finally snapping. The kicker: it didn’t break where the old crack was. Complete opposite end of the deck.

  • MaxHeadroom

    Yeah I guess it happens to everybody after so many years skateboarding. The thing with this bus was that I actually faced that sucka, head on, and jumped out of the way. It came within inches of smacking me. I’m gonna hang that board up on my wall one of these days..

  • I hit a crack in the sidewalk, my board shot out into the highway. 5 cars hit it, the last being a Camaro. Half of my board flew up and stuck to his suspension, aftermaking a tremendous loud bang. Onle lone truck was left in the road, which I scooped up and hid in my sweatshirt. The bitchin’ camaro wasn’t too happy about my skateboard shocker. Skate long enough and it’s bound to happen.

  • that happened to a friend of mine over the summer. bus the long way on it. both trucks though the top. snapped in have. bearings through the core of one of the wheels. and one of his indy’s broke in 5 places. baseplate into 2 pieces, hanger into 3.

  • Swamp Thing

    Does this mean I have to produce pictures to back up my Weirdo story? They do exist, by the way…

  • talentlessquitter

    Aw,those bare bearings look,well,awful;the sad remains of a freak bus accident.

Leave a Reply to masterochicken (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...