Note: this search box only works for area of the site you are in.

If you're in t Daily, it searches Daily. If you are the Galleries, it searches the Galleries, etc...

Skate and Annoy: Daily

BCSA Harrisburg skateboard contest photos

Harrisburg BCSA contest photos

Colin Walsh (rules) took his camera to the BCSA contest at Harrisburg, Oregon on the 4th of July. Check out the shots. Colin, looks like you’ve got some intermittent problems with the image sensor on your camera. It may be related to shooting into the sun. I know my D-70 gives me some weird green streaks in similar situations sometimes.

Gabe from Dokument.
hbc-0271

Mike Crespino & BCSA’s Kevin Solomon
hbc-0310

Mike Crespino/Hand Plant on gnarly wall
hbc-0320

Gabe
hbc-0405

Mike Crespino/ Pending Disaster
hbc-0411

Gabe from Dokument – tweakn it out
hbc-0433

hbc-0434

Mike Crespino
hbc-0436

Unknown – A little too tweaked out
hbc-0450

And the aftermath, one minute later
hbc-0457

The official contest results.

Here are the official results of the Harrisburg Competition. We had 42 riders compete! Thanks to the City of Harrisburg and all those who help make the day worth hanging out in the heat. If your name is spelled wrong let us know.

Locals Only Best Trick Competition:
Beginner: 1st: Austin Hillsman
2nd: Cole Freeman
3rd: Cordell Day
Intermediate: 1st: Nicheal Philpot
2nd: Charles Christensen
3rd: Jonathon Willis
Open Street Jam Competition:
Beginner: 1st: Brett Blair
2nd: Cordel Day
3rd: Antony Hillsman
Intermediate: 1st: Robert Thelen
2nd: Shay Sulivan
3rd: Alex Cribbs
Advanced: 1st: Austin Arrowood
2nd: Mike Crespino
3rd: Mike Bucknell
Open Bowl Fest Competition:
Beginner: 1st: Mike Philpots
2nd: Kiah Deskins
3rd: Joey P.
Intermediate: 1st: KC Stalcop
2nd: Tyler Percell
3rd: Dan Harris
Advanced: 1st: Mike Crespino
2nd: Robert Thelen
3rd: Mike Bucknell

23 comments.  

Leave a Comment

23 comments

  • nweyesk8…I know I was just messing with you. In my opinion if your the one doing most the work it’s a DIY. Even if you pay someone to come in and do some of the manual labor or finishing work. I just wish I had some money to pay for some. I have been doing most my bowl by myself. I’m down on the coast. I don’t have an army of skater’s to come help like MC did up in Portland. Shit around here when we built Coos Bay’s park. All the skater’s did around here was complain that we weren’t building what they wanted. So they didn’t even help build there own park. I would help you for free just to skate your new bowl, but I have a lot on my plate right now and you live 3 hours from me. I respect anyone that takes it apon them self to build shit to skate. It’s hard work, but well worth it in the end. Good luck on your project.

  • nweyesk8

    Well concrete warefare riddle me this, If you get a group of professional park builders to come in with a concrete truck and do all the float and finish in a day, is it still a DIY? MC has a rad pool now, I know he personally sweated a lot during the whole process, but how much of the overall work can he claim as a DIY vs all the help that others put into it and made it a community effort. Maybe not a public community bowl, but his would certainly qualify as a porland skater community project in the end. Plus it seems if I don’t pay somebody on occasion, I am totally doing it myself at the hardest times. I never said I have money to burn, but if it is an issue of moving 100 cinder blocks by myself vs paying someone 10$ an hour to move 50 of them, then I actually get more work done in the end….Just takes a little longer to come up with material monies is all.

  • Gabe killed it. If you land a 270 over a hip you would think it would at least get 3rd. Just say no to early grabs

  • nweyesk8….if your paying $10 an hour for manual labor. Is it still DIY, and If you have money to burn. Can you send some my way. I need more money for my bowl…

  • colinwalshrules

    i’ll work all day (831) 359 8388. im going to the hippie fair this weekend in search of a princess. and possibly a poo facorty session on sunday, after that im down to dig, pour, lift, sift, anything you name it, i’ll attempt to do it. give me a call whenever.

  • nweyesk8

    collin, on days i’m working on my DIY, I ‘m paying 10$ an hour for manual labor….

  • colinwalshrules

    well, im probobly going to send it in after trifecta. i have no job and about 90$ in my bank account, so buying one is out of the question, but circuit city legally cant chase you if you are off their property.. i could upgrade to a D90…. thanks for the advice.

  • skaterhusseindave

    Thanks Danimal, and remember kids, snowboarders can’t do half or full cabs cuz they’re OLLIES!!!

  • fakie full cab? huh? wouldnt that just be a cab

  • You could just run on over to Circuit City and grab one….. oh wait…

  • A

    Colin, (thanks for the pics) – Nope, I never sent it in. It happened a handful of times and I never got around to it while it was under warranty. My camera is about to die too. These things aren’t nearly as durable as a film camera.

    My advice.. send it in. If you don’t get it back in time for the trifecta, you can always buy one the day before from Best Buy or Frys, and then return it. (CHECK THE RETURN POLICY FIRST!) That’s bad advice that I shouldn’t be giving in public…

  • colinwalshrules

    Kilwag~ did u ever fix your sensor, this is coming up in all of my shots and i dont want to send my camera into nikon and not get it back before TRIFECTA, have u sent anything to them before? thanks for any advice

  • i got some more pics just loaded them ill try to send em randys’ way soon

  • I don't know

    No I’m kiddin, the handplant on gnarly wall was amazing,and maybe if there was only one of the super hesh. Was an awesome event just was expecting more of “dead street”. I mean who thinks gap up noseblunt pop in on capsule, oliie late shuv over the pyramid, fakie full cab, switch hardflips, noliie big heels, wall ride back 5-0 brick bank to ledge, etc, Have any life …. Right?

  • Willjones

    that one guy is extremely hesh

  • AMERICA……….Fuck yeah!

  • colinwalshrules

    I DONT KNOW—-none of those shots are early grabs either. “no pop”…right, how come you werent there? to busy putting bottle rockets up your ass?

  • colinwalshrules

    I wanted to take pictures of interesting shit, like boobs, wierd old people and skateboarding, pictures of some kid doing kickflips over a bank are not intersting. plus i just wanted to have fun and get wasted, which i accomplished. street skating is dead, vert is alive, I DONT KNOW- go suck on it.

  • I don’t know needs to call the WAaaaahhhhhhhmmmbulance. Where’s your photos of the event?

  • That invert on the tight side wall is sick!

  • I don't know

    42 riders and there’s only multiple shots of the same people doin the same stuff? I guess handplants and no pop early grab airs ,were the most advanced tricks that got thrown.

  • positive

    was Mike B in Doc Martins? I haven’t seen that guy in ages.

  • nweyesk8

    what, no Taylor sightings?

Leave a Reply to porterfield (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...