Skate and Annoy: Daily

happy valley skatepark

Happy Valley Skatepark

Time for more input on the Happy Valley skatepark in Clackamas County, Oregon. We must have missed a meeting or two, because from the looks of the tiny renderings, they appear to have chosen a designer already… Street plaza city, Newline? The meeting is Wednesday, April 29, 2009, from 5-7 p.m. at Sunnyside Elementary school on 13401 SE 132nd Avenue in Clackamas, OR. No word on whether the infamous Happy Valley back biter (seen above, lower right) will be allowed in the park. This is as good an excuse as any to post some more photos form the Happy Valley pool you love to hate.

Yeah, it’s pretty much just pictures of Mark, because Rich was behind his camera and that was the extent of our entourage. After you are done here, there are some more shots of this pool over here and here

Mark trying to carve over the stairs and under the ladder.
hv_3316 -  Happy Valley, Or pool

Air across the light on the deep face.
Happy Valley, Or pool -  hv_3417

The dog that bit me in the back while I was standing in the corner of the shallow end.
Happy Valley, Or pool -  hv_3392

Deep face wall.
Happy Valley, Or pool - hv_3371

He’s grinding, you know?
Happy Valley, Or pool -  hv_3362

Hey, it’s me! I can’t remember if Rich or Mark picked up my camera, but thanks to whoever it was. Cheater corner carve.
hv_3423

18 comments.  

Leave a Comment

18 comments

  • i’m pretty stoked for the new park. the design they choose is on the newline website now. it’s not all street,(thank god,) there appears to be a decent bowl in the corner. check it out. the shop i work for is bout a 10 minute skate from where the park is gonna be so i couldn’t be much happier.

  • Carl i don’t know what your fucking problem is about that 1.2 million dollar foam filled shithole, but since you dont even live here I am not taking anything you say to heart.

  • I wish I would have skipped the meetings too. We were told our voice would matter but it was just a big waste of time, except for the joy of being laughed at and talked down to by the designers. The voice of the majority from the meetings is not represented in the final design, or the previous alternative designs. Newline didn’t come with any designs that even remotely compared to the diversity of the facility they are supposed to be replacing. But Carl’s right on two points. They did provide exactly what the client (Seattle Center, not Seattle skaters) hired them for. The Center wanted a pretty landscaped area that doesn’t look like a skatepark. And not everyone was shut out. Only those who disagreed with the all-plaza design (most of the skaters at the meeting) were shut out.

  • BTW this was so important to Bobcat that he skipped the meetings.

  • Dude.. not everyone was shut out of the process. Lots of local dudes who are still doing it hard were involved. I know more about what’s going on there than I do about PDX, because I was born there, genius.

    I don’t think I need to go on. Blame Seattle skaters, the Seattle Center, and me. Newline was only doing what they were hired for.

  • no, carl i’m not.

    democracy is when the government listens to the people.

    that is not the case here in seattle.

    remember, you live 165 miles south of seattle so how are you so wise about this?

  • I think you’re confusing fascism with democracy..

  • no, carl i’m the voice of reason and one person that’s not ever going to stand up to this bullshit ass-kissing fascist regime. Seattles skateboarding scene died in 2007.

  • Nice shots Randy. That one of MC going over the stairs below the coping is great.

  • I hope to someday be The Onion of skatepark opposition.

  • Bobcat is the Fox News of skatepark opposition.

  • Newline didn’t listen to the seattle skateboarders and taxpayers and they wont listen to you.

  • how do you loose when you don’t have to build.

    You fly some guy down form another country that is actually aware of the entire skate(industry)world “outside” of just Oregon, and have him actually listen to the kids “inside” of the town to deliver a concept of a park that is not biased, its not influenced by any other dudes or trends. Then gets the park built by an American company(California skate parks) that has a crew that wont bitch, about building something that they don’t personally agree with, and they do a good job. Just thank that some Old ass dude named Wally is not behind those drawings…otherwise you would have the same fucking bowls that are all slightly altered with the same 6 foot shallow end with Vert. Not that vert is bad, but when you make the mini section with vert you are sucking balls.
    Spectrum must be bitter that they fell behind on seing the potential GOLD MINE that newline has now seen by simply “drawing” a cool skate park and throwing down the apparent correct approach.

  • Concrete Warfare

    Lame!

  • This is great news.

  • with all respect to Grindline, Oregonians, should not let any skatepark builders into their state that arn’t from Oregon!

  • warehouse

    You all will regret letting newline into the state.
    Word from Spectrum guys…they’ll take a loss to get a job. I bet the kids are stoked on another street park.

Leave a Reply to Rich (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...