Skate and Annoy: Daily

Gabriel Park skatepark nears completion

Gabriel Park nears completion

The Gabriel Park skatepark is nearly done. It’s not open yet but the Airspeed crew was engaged in some “dry runs” last Sunday when the weather was (finally) nice. In person, the park is much different than it looks in construction photos, or these photos, for that matter. I was a little worried about excessive flat bottom in the middle area, but it’s not a problem. It’s almost as if these guys know what they are doing. Imagine that! This park is unlike anything the Portland area has to offer and will make an excellent addition the local terrain and lore. The concrete is smooth and the lines are varied. I would say that you’d have to be mentally challenged to not have fun here, but that would assume I’ve actually ridden it…

Gabriel Park skatepark nears completion.

The park is a lot smaller than the photos would make it seem. It can get pretty hairy when it’s full. Fortuantely, there’s an easy out at almost any point if you need a quick exit. No word on the official opening date. Click to enlarge.

Here’s a panorama.
Gabriel Park skatepark panorama

Gabriel Park skatepark

Gabriel Park skatepark

Geth Noble over the hip. I always forget, when he does these he bones them out at the last second, just when you think it’s over. Of course, this shot is pre-bone out.
Gabriel Park skatepark - Geth Noble

Part of the airspeed crew. I didn’t catch this guy’s name.
Gabriel Park skatepark

Gabriel Park skatepark

Gabriel Park skatepark

Airspeed crew – Billy
Gabriel Park skatepark - Billy

Gabriel Park skatepark - Billy

Gabriel Park skatepark - Billy

View from the hill. I suspect this will be a commons sight once the park opens.
Gabriel Park skatepark

A little bit higher up
Gabriel Park skatepark

A representative of SPS was on hand to do a little testing. Mark Conahan about to launch off the extension.
Gabriel Park skatepark - Conahan

Gabriel Park skatepark - Conahan

Need more? EPM has some more coverage.

10 comments.  

Leave a Comment

9 comments

  • enemy combatant

    I like it because it has easy drops and I can carve nice big smooth mellow lines everywhere. Perfect!

  • yo momma

    For the size, Hollyfarm smokes Gabriel. I thought they were going to build on the hillside, like they discussed in early design plans. Maybe I heard wrong. It is a lot of fun, but Lincoln city’s new addition alone smokes Gabriel. My girlfriend even said “that’s a little bowl” I guess I’ve spoiled her with Dreamland parks. It just pisses me off you old farts shot down Geth’s double funnel idea of something really GNARLY.

  • I wouldn’t mind having Holly Farm as my neighborhood skatespot, Of course, living near Pier Park would be nice too.

  • abegnegal

    Yeah Holly Farm Sucks. Don’t even bother going there. Total waste of time.

  • It’s about a 100 times more fun than holly farms (no offense).

  • Looks like a lot more fun than Holly Farm.

  • Better to trip on your balls occasionally than to sit on them all day while others define your environment for you.

  • When they were in the design portion of this park everyone was trippin balls on what the snake run should have incorporated in it. People trip on their balls too much.

  • That looks SUPER fun! I wonder how it’ll accommodate multiple people skating at once…

Leave a Reply to yo momma (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...