Skate and Annoy: Daily

070819_skateboard_chaplain.jpg

16 year old skateboarder falls while being towed by car, dies.

I just got home from the Dew Tour and I turn on the TV to this, I want to send out my deepest sympathy to the family of Joseph Madison.

By KATU Web Staff
VANCOUVER, Wash. – A 16-year-old Vancouver boy was killed Sunday after falling from his skateboard while hanging onto a moving vehicle, police said.

The Clark County Sheriff’s Office identified the teen as Joseph Stefano Madison of Vancouver, Wash.

According to the sheriff’s office, Madison was being pulled by a vehicle driven by another 16-year-old when the incident happened about 4 p.m. at the intersection of Northeast 29th Avenue and Northeast 139th Street – just down the street from Legacy Salmon Creek Hospital.

The sheriff’s office said Madison was holding the rear driver’s side window and was being pulled down a road when the vehicle suddenly hit a dip in the street and Madison lost his grip on the window. The teen then fell to the ground and hit his head on the pavement.

Madison was declared dead at the scene.

Authorities did not say how fast they believe the car was traveling when the teen fell.

No one else was injured. There were two other 16-year-old passengers in the vehicle at the time.

The sheriff’s office said neither alcohol nor drugs appear to be a factor in the crash.

Source

6 comments.  

Leave a Comment

6 comments

  • billy the kid

    amen!

  • Casey M.

    I actually spent a night in jail and got charged with disorderly conduct, reckless driving and reckless endangerment for towing a skateboarder behind my car, this was in Portland.

    It seems like most serious head injuries in skateboarding come from street-grown kids who try downhill or bowls without being introduced first to the whole helmet-wearing scene. I remember I came from the street world and never even considered wearing a helmet when I started bombing hills faster than I could run, I was just fortunate enough to meet guys who’d been doing it long enough to know that it’s just a matter of time before your head hits the ground, they made it very clear that in the downhill scene you are straight up told to get the fuck out if you don’t wear a helmet. Not just for your own safety, but because you killing yourself leaves a huge burden on everyone else that has to be associated with the activity that killed you.

    Just Saturday one of the guys I was riding with went down at only 30mph probably, full leathers, full face helmet, and he still knocked himself out and got a concussion. That would have been another death right there without a helmet, people can’t fuck around with downhill (or other means of similar speed), shit will kill you.

  • corncobcock

    i see it everyday…i work in a trauma unit, and expect to be in there someday. fuck it..”45 mph…”

  • I just saw the same kind of story on the news when I was in Chicago last week, suburban kid with brain damage from being towed behind a car and slamming on his head.

  • I did it… once. I was a fast learner… “if it hurts (and gives you severe roadrash) when you do that, don’t do that no mo’.”

  • If you search on Associated Press, Reuters, or some other syndicated news wire service for skateboarding. You’d be amazed at just how prevalent this kind of accident is.

    I’d venture to say everyone here has tried towing off a car at some point in their life. Damn Back to the Future.

Leave a Reply to Eric Cherry (Cancel Reply)

Buy Stuff

Help support Skate and Annoy and keep the updates coming!

Recent Comments

  • Eddie: Found this in 2026, so I recently acquired this gonz first model board through an uncle that got it at a thrift. I knew it was old but needed the verification and this article helped me out a lot. Kne...
  • Ashley Harris: I'd like a free catalog please...
  • Szin napalm: My girl has one of these and I put some monster truck style offrad wheels on it the thing is beast. I'm trying to get her to put longboard trucks on it like these reverse style 😀 I got...
  • Matt Be: Those were great starter boards. So many kids got one after graduating from the plastic banana boards. After wearing out the Executioner, it was time for a "Pro" board....
  • Kilwag: Thanks for the update....
  • iDL: Silverstar was a subsidiary of Nicotine Wheels/East Coat Urethane. Originally Ricky Oyola set up Illuminati as a subsidiary of Zoo York but had to close the company due to an existing copyright on ...
  • Matt O'Connell: Turtles was near my house, got demolished in 98 or 99. My friends and I were the last to skate it with Charlie Wilkins and Vinnie Ponte, next day it was demolished after an insane session. Last peop...
  • Kilwag: You're going to love this - the original packaging: https://skateandannoy.com/blog/2014/06/long-rider-mania/...
  • Muppy: 2026 and I’m looking at one in my new band prac room right now. Cheers for this info guys!...
  • J.C.Hoogendijk: was my first deck 40 years ago...
  • Lee: Like Jason already said, the Conquering Warrior was a real complete and it was also my first proper skateboard (I don't consider it my first proper pro board). It was sold in sporting goods stores in ...
  • Ciaran gallagher: Friend me on Facebook Ciaran Gallagher Long Beach I will give you more info. Just seen message...
  • wes: I have a few of these....
  • Kilwag: Well this is funny. I while digging through my basement getting ready for a skate swap, I discovered I already had this game, buried in sea of plastic tubs filled with skate toy ephemera....
  • SEAN GOFF: Thats amazing...
  • Sandokanpedro: Salve ,anche io posseggo le due versioni.... imbullonati e l'altro perni fusi di Il primo nero con adesivo ed era accessoriato con ruote long ,recuperate le sue originali adesso è completo. L'altro...
  • Kilwag: Sorry, it's not our video. looks like it has been removed....
  • Dan: I realize this is a couple years old now, but I really wanna watch this video again. Any chance you can make the YouTube video public again and share the joy?...
  • Seth: These are dope af....
  • Ken: This is a great write up about Surf MC’s. Totally terrible. Wow. I don’t remember them in the 80s, but I grabbed the Surf or Die 12” single from Goodwill the other day. I may file a law suit aga...
  • Maria: This was my Dads company!!! He started it in our garage in Del Mar. I was 14 at the time. Thought I was the shit when we’d go to the competitions!...
  • Harry Rivenburgh: I have one. Contact me if you're still interested...
  • Steve: The top of the range Skuda La did get a review in Skateboarder Mag back in the day...
  • Rick Akiyama: They don't mention that they made 2 sizes of the variflex connection skateboard trucks. One is a¹ 5" hangar with an 8" axle and the other is a wider 6" hanger with an 9" axle I own both sizes...
  • Jan Haviney: I have a Bahne Banshee skateboard that I have had since the early 2000s. It's brand new, never used, still wrapped in cellophane and has the tags on it. I'd like to sell it... don't know it's worth o...
  • Marlee: Can it be taken apart...
  • Oscar: Hey! Amazing ilustrations, thanks so much I was have skate blue color with stamp in they Center of table of STP (lubricant), have a Big wheel 3" inch Continental. What model was? For You time a...
  • Seth: This is dope af. The crest/coat of arms really elevates the whole affair. 🧐...
  • Some Bullshit AI Spam: I totally get the regret of selling something you’ve had for a while, especially when it's a piece of skateboard history. The unique packaging of the Sidewinder Wheels must’ve been a hit—it's am...
  • Warren D Robinson: I had the black board (above) when I lived in Germany in 1978....
  • Michael Harris: I used to skate the slopes of Heathcote High school and saw the movie which I was in !...
  • Ivan Higgs: I have an original Ultra Flex board. It is 100% complete and still in great shape. We bought our house 8 years ago, and i found it when we were cleaning underneath the stairs. There was a hidden area...
  • Kilwag: Holy cow, amazing collection. Are those all yours?...
  • Gary: I’ve got a couple of the native skateboards on my instagram page @planksforlooking . The Bakersfield address and business name are still visible but most all the graphic has worn off on both boards...