History and modern ice boards

Iceboards

On Tuesday we got a nice covering of fat, white snow here in Portland. It came down pretty good for a couple hours in the middle of the day. It even stayed solid on the streets, which usually doesn’t happen here. But, by the end of the daylight it had pretty much been replaced by rain, and it melted away. I looked outside at about 5:00 and it all seemed like a pleasant dream. Over the weekend I went to a kids birthday party (with my kids, not to abduct toddlers…) that was at an ice rink. It was the firsttime I’d had on ice skates since grade school. I go to thinking about those old ice board kits that were for sale in the back of Thrasher.

I’ve never seen a scan of those old iceboard kits online anywhere. The closest I could find is Hung Chang’s Wackyboard collection that has the shot below. However, I think this is a later 90’s era device and not the conversion kit that used to be sold in the 80’s. Maybe “was for sale” better describes the kit, since no evidence of anyone actually buying them exists. This company was called Zeema. If you look at the blades, they seem to be made of several pieces, a carriage and a blade. The original ones (if I recall correctly) were more like regular flat ice skate blades cut or stamped from a sheet of metal that just bolted on. Again, if anyone has a copy of those ads, please share it.

zeema-ice-board

I did find a patent that shows what looks like the kit I remember. This one invented by West Chicago residents William K. Newell and Elizabeth Tomson (United States Patent 4114913) dates to 1977, so it would fit the time frame.

Iceboard patents

But that wasn’t even the first one. Back in 1966, United States Patent 3329439 was published that was essentially the 60’s era skateboard technology for ice. Instead of adapting the roller skate trucks, inventor Willard Gebien replaced the whole apparatus. Gebien was from Libertyville Illinois.

iceboard patent-1967

Then around 1982, inventor Thomas L Mayes from Chesapeake, Virginia came up with a plan that looked like he used disassembled hockey skates and attached them to the trucks. On one hand, it’s not very inspired or pretty to look at, but on the other hand, it’s roots are really close to the original concept of taking apart an old pair of roller skates to make the first skateboards. United States Patent 4521029 is just another iteration.

iceboard patent 1985

Then in the 90′, the iceboard patent race really, (ahem) heated up. The Shumays, (Adam and Sami) and the Abu-Shumays (Ibrahim) from Pennsylvania teamed up to invent this doozie of an idea, United States Patent 4896893. They threw everything they had at the problem. I’d love to see one of these contraptions. They actually applied for the patent in 1989. I’ll be they were bummed when the bottom of the iceboarding market fell out. Kids just didn’t have access to frozen ice vert ramps, so they moved to the… pbfffft!

iceboard patent 1990

Then in 1992, John Decesare from Glen Ridge, New Jersey basically did the same thing as Newell and Tomson did in 1977, except he added an apparatus to the trucks that allowed the angel of the blades to be adjusted, resulting in something that looks disturbingly like the Stroker trucks. Witness United States Patent 5161810.

iceboard patent 1992

In case you’ve forgotten the precursor to indys, heres a shot of the Stroker trucks.

stroker trucks

What about lately? Well, there’s always Railz, which opts for little skis instead of ice blades, but it’s the same concept, and we’ve covered it before. .

railz skateboard skis

But if street skaters can’t get along with bowl trolls, you can bet there will be discrimination against Railz riders from the guys keeping it real on the ice…

One of the first things that will turn up if you do a search for ice boards is something called Howtoons. See the little skateboard on the spalsh page?

Howtoons

They have a collection of comic book style pages aimed at kids that focus on how to make things. One of the items is an ice board. This is a different approach than the old style. Notice the stabilizer that actually connects the tips of the blades on each truck. It seems like a pretty usable and solid approach actually, but where is a kid going to find raw steel to make these? You can download a pdf of the file, not from Howtoons, but from Instructables.com.

Howtoons Iceboard

I had just about given up on the search when I found one of Chris Thomson’s senior design projects. These things look perfect.

Iceboard by Chris Thomspn

Unfortunately, there really isn’t any more information, other than a low-res action shot and a grainy prototype photo, and Chris hasn’t logged onto the portfolio site since June of 2007. I had one of those “Ah-ha” moments when I saw Chris’ last name, thinking he might be related to the Elizabeth Tomson, one of the inventors of the 1977 version, and the one that most closely resembles Chris’ designs. I figured the names were close enough for one to be a typo possibly, but Chris hails from New Zealand, so it seems less and less likely.

Chris Thomson - ice skateboard

So that wraps up the history of the iceboard. I’ve always wanted to try one back in the day. Again. please share the old advert if you have a copy, or feel free to fill me in on anything I’ve missed.

Right, I forgot about this 2001 application for the Ski-Snowbaord.United States Patent Application 2002005069 looks light as a feather!

ski-snowboard patent

21 Comments

  1. Well done Kilwag. I too would like to try one of those on a rink, I’d even dig the ice sailing rig, but getting trapped under ice in freezing water seems like a horrible way to die. So I’ll stay off the lakes.

    I would also worry about trying kickflips… you know when it doesn’t quite flip all the way and you land on the board upside down… wouldn’t want to slice a toe or anything.

  2. where is the patent for the Ice block carving machine that you would use to carve out quarter pipes, just like a pipe dragon but for ice///

  3. skaterhusseindave on January 29, 2009 - Reply

    My fantasy in the late ’70s was to spray our local skatepark with a fine water mist every night for a week or two to convert it for winter use…the iceblade wheel replacement kit I remember also had a strap-on toe pick for pushing on flat

  4. What if you tried to kickflip and chopped your own feet off? That would smarts.

  5. There is a segment of these ice skates in Skateboard Madness. I think you need the “full” version, the 411 re-release may have edited the scene (and others) out. Or use the vast resources of the Net to find the clip.

  6. Slitburn on January 29, 2009 - Reply

    Verticicle.

  7. Someone really should make an ice miniramp. Seems like it wouldn’t be that hard. They make huge ice sculptures, theres a hotel someone makes out of ice every year… Some reality TV show out there?

    You would think the companies making these things would have done it. That would get a lot of publicity.

  8. Could you push if you wore golf shoes?

    • Hey Carl the answer is YES. That is what we used. We did grind down the cleats to just small nubs and it work perfect. We also put rubber on the deck. That worked but the rubber started to rip up.

  9. Hi..i’m a fan and have been this web for a long time..anyway, i remember this ad on the back on thrasher mag..there’s another different ads / skater of this ads…

  10. Yep, but I don’t have it. Hopefully someone will send it in.

  11. UAU!!!That´s a good amazing idea, Skate in all weather.
    Here in brasil is impossible , we don´t have snow time.
    But the ideai very good …
    Brazilian Hugs

  12. Debra Fischler on March 30, 2009 - Reply

    The winter of 1964 I was iceskate boarding. It was fun! My father is Willard Gebien.

  13. Scotty on April 19, 2009 - Reply

    Don’t forget there is footage of Ice Skateboarding in a few films. I think one is SKATEBOARD MADNESS but i’m not absolutely sure without looking. but i know i’ve seen a few films that feature it.

  14. Heard you were looking for some info on the Zema Iceboard. Ask away. I know everything about it. Here is a link to the old Zema site that use to be up on the web 10 years ago. It’s not the greatest compared to today’s sites, but it has all the information about the iceboard in it. http://www.icarusnetworking.com/Zema/index.html

    And Scotty, one of the videos the iceboard was in is Thrasher’s “The Truth Hurts”. It’s a short clip but it is there.

  15. talentlessquitter on March 12, 2011 - Reply

    Somebody sell me those irons.Ice skating is in our (country’s) blood!

  16. warren on July 14, 2011 - Reply

    hi , im in the uk and i have a set of 4 iceblades with spacers ,they have etched onto them continental convertible u.s.a

  17. warren on July 14, 2011 - Reply

    ps , they are also from the late 1970s and i also still ahve me scuda la with lazer slalom trucks etc

Leave a Reply

Want an avatar? Upload a Globally Recognized Avatar for free at gravatar.com Note: Avatars are tied to a single email address, including comments left before the system was activated.

  SOTW  
 eBay Watch 
   GVK   
  Kid  

Shot of the Week
December 2nd

American GI

April/May, 2014 - 65 items

eBay Action

Grover's Video Korner #93
Seattle Road Trip 2014

Grover's Video Korner

Annoying Kid of the Month

Annoying Kid of the Month

Categories and Archives





Search and Annoy

Search Skate and Annoy - Daily

Search in Features, Ebay Watch, GVK...

Search in Galleries

This is none of your business